F-150, Mustang GT, Shelby GT350, Bullitt & Mach 1 - 103MM Premium Throttle Body
F-150, Mustang GT, Shelby GT350, Bullitt & Mach 1 - 103MM Premium Throttle Body
Premium Modified, Ported, and Calibrated Throttle Body.
FOR 103MM+ AFTERMARKET MANIFOLDS OR SUPERCHARGERS WITH GT350 THROTTLE BODY (TB) HOLE PATTERN OR GM LT1/LT2/LT4 TB HOLE PATTERN.
Fits:
RAPTOR 6.2L (2010-2014)
F-150 5.0L (2011-2014)
F-150 5.0L (2015-2017)
F-150 5.0L (2018-2020)
F-150 5.0L (2021+)
Mustang GT 5.0L (2011-2014)
Mustang GT 5.0L (2015-2017)
Mustang GT 5.0L (2018-2023)
Shelby GT350 5.2L (2015-2020)
Mustang Mach 1 & Bullitt 5.0L (2018-2023)
Includes: 103mm Throttle Body, Mounting Screws, and Gasket. Everything else sold separately (Inlet Coupler & Transitional Spacer)
Warranty: 30-day money-back, followed by an 11-month repair or replacement.
PLEASE NOTE: Current inventory is engraved. No engraving orders will be made custom (contact us for lead time).
Condition: New.
103MM: The classic ported throttle body, 1600 +/- 50 SCFM @ 20” H2O at WOT. - BNIB, 0 Miles.
FEATURES (103MM):
• Body and Sensors calibrated as a match set, zero intrinsic calibration issues.
• Porting Taper and Upstream Bore with Velocity Stack (Lip & Bore Reduction).
• 16 Ra Microinch, Diamond Polished Surface Finish (Lower Skin Friction).
• Dimpled Pattern on shaft trailing edge.
BENEFITS:
• Essential component in high-performance engine modification, with exceptional high flow capacity.
• Lower weight to power ratio at part throttle, for a more nimble/spirited driving experience.
• Linearization and smoothing of the curve for a more predictable response and crisper shifts.
• Immediate response right off idling while keeping idling function undisturbed (No Hesitation/Stumble).
• No drivability, idle, tuning, or similar issues relating to similar-sized throttle bodies.
• More air/power at every single throttle position after idle.
• Easy Installation.